Onix

€2.495,00 Incl. btw

Bestel nu en ontvang gratis een 2DW powercord twv € 280. Bestel het 2DW powercord en gebruik de kortingscode " gratis2dw".

 

Geldig t/m 06122017

 

 

With the goal of creating a very affordable, yet superior DAC in mind the designers of Metrum Acoustics have developed a new DAC, the ONYX By Metrum Acoustics.

It was an unprecedented challenge, which was eventually solved by using an entirely new chip, which has been exclusively developed by Metrum Acoustics and was first used in the PAVANE.

The parallel driven R2R ladder networks as used in the four DAC modules performs , especially when combined with our FPGA-driven “forward correction module”, on a higher level. This module splits up the audio samples for each channel into new separate data streams. Each dac cluster processes a portion of the data in the most linear region of the dac chips. The result of this process is an extremely high linearity, right down to -140 dB, which gives the ONYX a realistic 24 bit dynamic range. Due to the dual mono design over the entire frequency range an extremely high channel separation of 120 dB is realized. This contributes to the flawless positioning of instruments.

In short, the ONYX is a DAC that has taken all the lessons and experiences that her designer has learned over the years, and combined them in an ambitious DAC that can fit in every system. It is musical, honors the Non-oversampling principle while simultaneously incorporating the technological progress that has been made over the years.

SPECIFICATIONS

Working principle: Digital to Analog Converter, 24 bits non oversampling, Forward correcting technology, 2x DAC TWO modules per channel

Power: 15 VA toroidal transformers

Mains voltage: 110/115V AC 220/230V AC 60/50Hz

Input: 1x optical, 1x AES/EBU 1x coaxial and USB

Output RCA: 1x stereo pair single ended, 1x stereo pair XLR balanced

Frequency response: 1Hz – 20 khz -1dB. 44.1 kHz sampling, 1Hz – 65 kHz -1dB .192 kHz

Distortion: 0.006 % THD

Noise floor: -145 dB related to 2 Volt RMS

Output impedance: RCA 100 Ohm, XLR 100 Ohm

Sampling rate: Optical 44.1 – 96 kHz, Coax and AES/EBU 44.1 -192 kHz, USB 44.1 -384 kHz

Output Voltage: RCA Max. 3 Volts RMS, XLR Max 6. Volts RMS

Dimensions: 290 x 250 x 60 mm
Weight: 3.1 kg
BxHxD: 435 x 60 x 325 mm
Gewicht: 2,9 KG
Ingangen: 1x optical Toslink, 2x RCA coaxiaal en 1x USB.
Uitgangen: 2x RCA
Optical Sampling Rate: 44.1 - 96 kHz
Coaxial Sampling Rate: 44.1 -192 kHz
USB Sampling Rate: 44.1 - 384kHz
0 sterren gebaseerd op 0 beoordelingen